CH-640 Electrical (4 of 44)


[First] [Prev] [Home] [Index] [Next] [Last]


Position the tail-light fairing so that the center of the hole is 50 mm from the bottom of the tail and the fairing is 90 degrees to the ground. Then trace the fairing location on the rudder, remove the fairing and mark 10 mm in from the trace.
Position the tail-light fairing so that the center of the hole is 50 mm from the bottom of the tail and the fairing is 90 degrees to the ground. Then trace the fairing location on the rudder, remove the fairing and mark 10 mm in from the trace.


[First] [Prev] [Home] [Index] [Next] [Last]