Lycoming O-540 260 HP engine (37 of 154)


[First] [Prev] [Home] [Index] [Next] [Last]


This is the firewall portion of the top engine mount that I made. I am going to add an angle behind the firewall and drill a 1/2 inch hole in the center of it. Then I will bolt this to that location with an AN8 bolt and weld rods from this to the top left and top right sections of the dynafocal ring.
This is the firewall portion of the top engine mount that I made. I am going to add an angle behind the firewall and drill a 1/2 inch hole in the center of it. Then I will bolt this to that location with an AN8 bolt and weld rods from this to the top left and top right sections of the dynafocal ring.


[First] [Prev] [Home] [Index] [Next] [Last]